132-D12

CROSSWALK BEACONS

Designed for areas that need hazard beacons to be activated when pedestrians cross the street. Example; Collages, Banks, Hospitals, City Streets, and other Pedestrian crossings where people need to cross street safely. Also with our optional wireless transceivers you will be able to activate the beacons without running wires between the systems to make installation easier.

130-d8-crosstalk
img-sun

The Solar School Zone Beacon only utilizes the most up to date solar and electronics to maintain power levels thru rain, shine, sleet, or snow

img-led

LED technology increases life expectancy of the solar beacon and also burns less energy than conventional bulbs

img-mutcd

Meets MUTCD (Manual on Uniform Traffic Control Devices)

img-nchrp

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)

img-ite

Meets ITE Standards (Institute of Transportation Engineers)

Signal Head Housing

  • Size: 12″
  • Color: Yellow or Black
  • Visor: 360 degree Cap
  • Number of Beacons: 2
  • Material: Plastic injected polystyrene

LED Signal

  • Color: Yellow / Amber
  • Power Consumption (watts): 5
  • Seal: Weather Resistant
  • LED Bulbs: 2

Solar Panel

  • Solar: (1) 20 watt solar panel

Control Cabinet/Battery

  • Construction: .080 aluminum
  • Seal: Weather resistant
  • Access: Hinged on side
  • Lockable: Twist lock on

SPLasher

All-in-one Solar Controller, Flasher, and Auto-Dimmer:

  • Optional Wireless Control
  • Small compact design
  • Adjustable Duty Cycle
  • Multi-Stage Battery Charger
  • Maximum Load: 50W (x2)
  • Maximum Power Point Tracking
AC-OPT20 For Models: 108-D12; 120-S8; 120-D8; 122-S12; 122-D12; 126-D12; 128-D12; 130-D8; 132-D12. Remove 20W solar panel, solar panel mounting bracket, battery, large battery box and regulator. Add 20W power supply and small control cabinet.
ADD20W Additional 20 watt solar panel
ADD40W Additional 40 watt solar panel
ADD80W Additional 80 watt solar panel.
BAT-12-55A 55 amp, 12V, AGM battery, Dimensions: 9.40″x5.50″x8.20″
BAT-12-100A 100 amp, 12V, AGM battery; Dimensions: 12.16″x6.75″x8.70″.
BAT-12-100W-27 100 amp, 12V, Wet cell battery; Dimensions: 12.16″x6.75″x8.70″
CB-BBK Box bracket with 1 clamp. Two (2) required. Price/each
CCTR-12 COMPLETE 12′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 12′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-14 COMPLETE 14′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 14′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-20 COMPLETE 20′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 20′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CL-1023 Cabinet lock Type 2 with tapered latch and 2 keys.
CL-1026 Cabinet lock Type 1 police lock with tapered latch and 2 long keys.
CL-3PT 3 point locking system with Type 1 or Type 2 lock and 2 keys.
CTR-MB Mounting hardware per cabinet (if K&K CTR pole not purchased) to include: pole plate with set screw; 1 1/2″ nipple; tristud elbow with set screw; rubber washer and box bracket.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include: pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CTR-PC Pole collar to strengthen CTR pole base connection.
CTR-UBB Mounting hardware for box (U-bolt). Two (2) required.
CTR-UBH Mounting hardware for head (U-bolt).
CTR-UBS Mounting hardware for sign (U-bolt). Two (2) required.
CTR-UC U-Channel post break away kit, crash tested and 3lb u-channel post included.
UCHANNEL 8′ U-channel post (3lb per ft).
UP-CC-IP30-30 Upgrade to 30 amp regulator with meter.
W11-2-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Pedestrian” Diamond Grade sign
W11-2-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Pedestrian” High Intensity sign