110-S12

SCHOOL ZONE FLASHING BEACONS

The Model 112-S12 solar school zone flasher beacon helps to keep children and adults safe on roadways by cautioning oncoming traffic to be vigilant of pedestrians when flashing. Solar School Zone flasher beacons are used to help warn vehicular traffic of reduced speed limits and increased pedestrian traffic.

img-112-S12
img-sun

The Solar School Zone Beacon only utilizes the most up to date solar and electronics to maintain power levels thru rain, shine, sleet, or snow

img-led

LED technology increases life expectancy of the solar beacon and also burns less energy than conventional bulbs

img-mutcd

Meets MUTCD (Manual on Uniform Traffic Control Devices)

img-saferoutes

The system fits into Safe Routes to School (SRTS) infrastructure funding models

img-calander

The 365 day Programmable timer module allows you to program in advance what days the solar beacons will be activated, not be activated, and time of day they are activated.

img-nchrp

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)

img-ite

Meets ITE Standards (Institute of Transportation Engineers)

Signal Head Housing

  • Size: 12″
  • Color: Yellow or Black
  • Visor: 360 degree Cap
  • Number of Beacons: 1
  • Material: Plastic injected polystyrene

LED Signal

  • Color: Amber
  • Power Consumption (watts): 5
  • Seal: Weather Resistant
  • LED Bulbs: 1

Solar Panel

  • Solar: (1) 30 watt solar panel

Regulator

  • Rated Solar Input: 10 A
  • Rated Load Current: 10 A
  • Disconnects: Low and high voltage disconnect
  • Onboard diagnostics: Solar, battery, and load

Control Cabinet/Battery

  • Construction: .080 aluminum
  • Seal: Weather resistant
  • Access: Hinged on side
  • Lockable: Twist lock on

Programmable Timer Module

  • Programmable Days: 365
  • Program Steps: 500
  • Exceptions: 63
  • Programs: 32
  • Memory: Nonvolatile
  • LCD: 2 Line x 16 Character Backlit
  • Automatic: Leap Year & DST

Solid State Flasher

  • Flash rate: 60 F.P.M.
  • Construction: Epoxy encapsulated
  • Terminals: (2) input (4) Output
AC-OPT30 For Models: 110-S8; 112-S12. Remove 30W solar panel, solar panel mounting bracket, large battery box and regulator. Add 20W power supply and small control cabinet.
ADD20W Additional 20 watt solar panel
ADD40W Additional 40 watt solar panel
ADD80W Additional 80 watt solar panel.
BAT-12-55A 55 amp, 12V, AGM battery, Dimensions: 9.40″x5.50″x8.20″
BAT-12-100A 100 amp, 12V, AGM battery; Dimensions: 12.16″x6.75″x8.70″.
BAT-12-100W-27 100 amp, 12V, Wet cell battery; Dimensions: 12.16″x6.75″x8.70″
CB-BBK Box bracket with 1 clamp. Two (2) required. Price/each
CCTR-11 11′, Crash tested, Spun Aluminum Pole, Base,Cap, 4 Anchor Bolts
CCTR-12 COMPLETE 12′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 12′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-14 COMPLETE 14′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 14′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-20 COMPLETE 20′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 20′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CL-1023 Cabinet lock Type 2 with tapered latch and 2 keys.
CL-1026 Cabinet lock Type 1 police lock with tapered latch and 2 long keys.
CL-3PT 3 point locking system with Type 1 or Type 2 lock and 2 keys.
CTR-MB Mounting hardware per cabinet (if K&K CTR pole not purchased) to include: pole plate with set screw; 1 1/2″ nipple; tristud elbow with set screw; rubber washer and box bracket.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include: pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CTR-PC Pole collar to strengthen CTR pole base connection.
CTR-UBB Mounting hardware for box (U-bolt). Two (2) required.
CTR-UBH Mounting hardware for head (U-bolt).
CTR-UBS Mounting hardware for sign (U-bolt). Two (2) required.
CTR-UC U-Channel post break away kit, crash tested and 3lb u-channel post included.
S1-1-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – School Crossing” Diamond Grade sign
S1-1-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – School Crossing” High Intensity sign
S5-1-2448-XX-DG Replace XX with size 15, 20, 25, 30, 35, 40, 45 – “School Speed Limit” Diamond Grade sign
S5-1-2448-XX-HI Replace XX with size 15, 20, 25, 30, 35, 40, 45 – “School Speed Limit” High Intensity sign
UCHANNEL 8′ U-channel post (3lb per ft).
UP-CC-IP30-30 Upgrade to 30 amp regulator with meter.