E112-D12

SCHOOL ZONE FLASHING BEACONS

No matter how large or small your school system is, K&K SYSTEMS has a full line of solar school flasher beacons to keep children and adults safe. Solar School Zone flasher beacons are used to help warn vehicular traffic they are entering an area requiring extra caution.

img-E112-D12-1
img-sun

The Solar School Zone Beacon only utilizes the most up to date solar and electronics to maintain power levels thru rain, shine, sleet, or snow

img-led

LED technology increases life expectancy of the solar beacon and also burns less energy than conventional bulbs

img-mutcd

Meets MUTCD (Manual on Uniform Traffic Control Devices)

img-saferoutes

The system fits into Safe Routes to School (SRTS) infrastructure funding models

img-calander

The 365 day Programmable timer module allows you to program in advance what days the solar beacons will be activated, not be activated, and time of day they are activated.

img-nchrp

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)

img-ite

Meets ITE Standards (Institute of Transportation Engineers)

Signal Head Housing

  • Size: 12″
  • Color: Yellow or Black
  • Visor: 360 degree Cap
  • Number of Beacons: 2
  • Material: Plastic injected polystyrene

LED Signal

  • Color: Amber
  • Power Consumption (watts): 5
  • Seal: Weather Resistant
  • LED Bulbs: 2

Solar Panel

  • Solar: (1) 30 watt solar panel

Regulator

  • Rated Solar Input: 10 A
  • Rated Load Current: 10 A
  • Disconnect: Low and high voltage disconnect
  • Onboard diagnostics: Solar, battery, and load

Programmable Timer Module

  • Programmable Days: 7
  • Memory: Nonvolatile

Solid State Flasher

  • Flash rate: 60 F.P.M.
  • Construction: Epoxy encapsulated
  • Terminals: (2) input (4) Output
ADDTR Free upgrade to solar tilt and rotate.
Bat-12-18A 18 amp, 12V, AGM battery; Dimensions: 7.13″x2.99″x6.54″
CB-BBK Box bracket with 1 clamp. Two (2) required. Price/each
CCTR-11 COMPLETE 11′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 11′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-12 COMPLETE 12′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 12′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-14 COMPLETE 14′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 14′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include: pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CTR-PC Pole collar to strengthen CTR pole base connection.
CTR-UBH Mounting hardware for head (U-bolt).
CTR-UBS Mounting hardware for sign (U-bolt). Two (2) required.
CTR-UC U-Channel post break away kit, crash tested and 3lb u-channel post included.
S1-1-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – School Crossing” Diamond Grade sign
S1-1-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – School Crossing” High Intensity sign
S5-1-2448-XX-DG Replace XX with size 15, 20, 25, 30, 35, 40, 45 – “School Speed Limit” Diamond Grade sign
S5-1-2448-XX-HI Replace XX with size 15, 20, 25, 30, 35, 40, 45 – “School Speed Limit” High Intensity sign
UCHANNEL 8′ U-channel post (3lb per ft).
UP-CC-IP30-30 Upgrade to 30 amp regulator with meter.