106-S8

SOLAR HAZARD BEACONS

Flashing 24 hours a day, seven days a week, the model 106-S8 Hazard beacon is an advanced 24-hour solar flasher. Whether in congested cities, or on rural and remote roadways, the 24/7 Hazard flasher are used to help warn vehicular traffic to possible hazardous areas or intersections ahead. dangerous curves, stop ahead, dangerous crossings, road construction, and speed zones are just a few of the many applications where solar stationary flashing beacons will enhance the visibility of roadway signage.

106-S8-66x300
img-sun

The Solar School Zone Beacon only utilizes the most up to date solar and electronics to maintain power levels thru rain, shine, sleet, or snow

img-led

LED technology increases life expectancy of the solar beacon and also burns less energy than conventional bulbs

img-mutcd

Meets MUTCD (Manual on Uniform Traffic Control Devices)

img-saferoutes

The system fits into Safe Routes to School (SRTS) infrastructure funding models

img-nchrp

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)

img-ite

Meets ITE Standards (Institute of Transportation Engineers)

Signal Head Housing

  • Size: 8″
  • Color: Yellow or Black
  • Visor: 360 degree Cap
  • Number of Beacons: 1
  • Material: Plastic injected polystyrene

LED Signal

  • Color: Red
  • Power Consumption (watts): 5
  • Seal: Weather Resistant
  • LED Bulbs: 1

Solar Panel

  • Solar: (1) 40 watt solar panel

Control Cabinet/Battery

  • Construction: .080 aluminum
  • Seal: Weather resistant
  • Access: Hinged on side
  • Lockable: Twist lock on

SPLasher

All-in-one Solar Controller, Flasher, and Auto-Dimmer:

  • Optional Wireless Control
  • Small compact design
  • Adjustable Duty Cycle
  • Multi-Stage Battery Charger
  • Maximum Load: 50W (x2)
  • Maximum Power Point Tracking
AC-OPT40 For Models: 110-D8; 112-D12; 105-S8; 115-S12; 106-S8; 116-S12; 124-D12. Remove 40W solar panel, solar panel mounting bracket, large battery box and regulator. Add 20W power supply and small control cabinet.
ADD20W Additional 20 watt solar panel
ADD40W Additional 40 watt solar panel
ADD80W Additional 80 watt solar panel.
BAT-12-55A 55 amp, 12V, AGM battery, Dimensions: 9.40″x5.50″x8.20″
BAT-12-100A 100 amp, 12V, AGM battery; Dimensions: 12.16″x6.75″x8.70″.
BAT-12-100W-27 100 amp, 12V, Wet cell battery; Dimensions: 12.16″x6.75″x8.70″
CB-BBK Box bracket with 1 clamp. Two (2) required. Price/each
BAT-12-55A 55 amp, 12V, AGM battery, Dimensions: 9.40″x5.50″x8.20″
CCTR-12 COMPLETE 12′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 12′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-14 COMPLETE 14′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 14′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-20 COMPLETE 20′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 20′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CL-1023 Cabinet lock Type 2 with tapered latch and 2 keys.
CL-1026 Cabinet lock Type 1 police lock with tapered latch and 2 long keys.
CL-3PT 3 point locking system with Type 1 or Type 2 lock and 2 keys.
CTR-MB Mounting hardware per cabinet (if K&K CTR pole not purchased) to include: pole plate with set screw; 1 1/2″ nipple; tristud elbow with set screw; rubber washer and box bracket.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include: pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CTR-PC Pole collar to strengthen CTR pole base connection.
CTR-UBB Mounting hardware for box (U-bolt). Two (2) required.
CTR-UBH Mounting hardware for head (U-bolt).
CTR-UBS Mounting hardware for sign (U-bolt). Two (2) required.
CTR-UC U-Channel post break away kit, crash tested and 3lb u-channel post included.
SWXP OPTION FOR HAZARD BEACON. Microwave motion detector that detects pedestrians standing curbside and triggers a flasher switch.
TC26-B OPTION FOR HAZARD BEACON. Microwave motion detector that detects oncoming vehicles and triggers operation of a flasher switch.
UCHANNEL 8′ U-channel post (3lb per ft).
UP-CC-IP30-30 Upgrade to 30 amp regulator with meter.
W3-1-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Stop Ahead” Diamond Grade sign
W3-1-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Stop Ahead” High Intensity sign
W3-3-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Signal Ahead” Diamond Grade sign
W3-3-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Signal Ahead” High Intensity sign
W8-5-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Slippery When Wet” Diamond Grade sign
W8-5-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Slippery When Wet” High Intensity sign
W8-6-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Truck Crossing” Diamond Grade sign
W8-6-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Truck Crossing” High Intensity sign