Flashing 24 hours a day, seven days a week, the model ECO-118-D12 Hazard beacon is an advanced 24-hour solar flasher. Whether in congested cities, or on rural and remote roadways, the 24/7 ECO Hazard flashers are used to help warn vehicular traffic to possible hazardous areas or intersections ahead. dangerous curves, stop ahead, dangerous crossings, road construction, and speed zones are just a few of the many applications where solar stationary flashing beacons will enhance the visibility of roadway signage.


The Solar School Zone Beacon only utilizes the most up to date solar and electronics to maintain power levels thru rain, shine, sleet, or snow


LED technology increases life expectancy of the solar beacon and also burns less energy than conventional bulbs


Meets MUTCD (Manual on Uniform Traffic Control Devices)


The system fits into Safe Routes to School (SRTS) infrastructure funding models


NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)


Meets ITE Standards (Institute of Transportation Engineers)

Signal Head Housing

  • Size: 12″
  • Color: Yellow or Black
  • Visor: 360 degree Cap
  • Number of Beacons: 2
  • Material: Plastic injected polystyrene

LED Signal

  • Color: Yellow / Amber
  • Seal: Weather Resistant
  • LED Bulbs: 2


All-in-one Solar Controller, Flasher, and Auto-Dimmer:

  • Optional Wireless Control
  • Small compact design
  • Adjustable Duty Cycle
  • Multi-Stage Battery Charger
  • Maximum Load: 50W (x2)
  • Maximum Power Point Tracking

Solid State Regulator (built-in flasher & dimmer) K&K Systems SPLasher is a compact all-in-one solar controller with maximum power point tracking, flasher, and auto-dimmer. Its compatible with all 24-7 solar stop beacons, hazard beacons, and has a dry contact for sensor activated beacons. The switch port allows you to hook up any activation switches such as the high water level sensor, motion sensor, push button sensor, moisture sensor, or radar sensor. With the adjustable mode, you can adjust the duty cycle from 90/10 to 50/50 and change the flashers to activate for 24-7, 30 minutes, 3 minutes, or 1 minute.

ADD10W Additional 10 watt solar panel.
ADD20W Additional 20 watt solar panel
DED-LED Deduct 12″ LED and housing
ECO-R ECO Solar Beacon Radar for Vehicles. Speed range: 5-99 mph. Also can be set for KPH
ECO-RP ECO Solar Beacon Radar for Pedestrians. Speed range: .5-38 mph.
ECO-RTM ECO Solar Beacon Radar for Towmotor. Speed range: .2-16 mph.
ECO-SS ECO Solar Beacon Speed Selector switch designed to set threshold to trigger radar. Set in 5 minute increments.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CTR-MB Mounting hardware per cabinet (if K&K CTR pole not purchased) to include: pole plate with set screw; 1 1/2″ nipple; tristud elbow with set screw; rubber washer and box bracket.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include: pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CrossTalk Wireless Beacon Control System
CTS-BPMS Bollard Pedestrian Motion Sensor – (for CrossTalk or SPLasher)
CTS-B Bollard – Height: 42″ (for CrossTalk or SPLasher)
CCTS-HWS High Water Sensor – 12V epoxy-coated sensor; housed in high impact PVC construction; will detect any conductive non-flammable liquid. (for CrossTalk or SPLasher)
CTS-MS Moisture Sensor – Dual 12V epoxy-coated sensors; no mechanical parts; triggered by a moisture bridge across the sensor contacts. (for CrossTalk or SPLasher)
SPL-FSC Fire Station Control – Includes splasher and antenna; 12V power supply; momentary push-button switch; LED light when powered on. (for SPLasher only)
SPL-DBF Double Button Fob – Double button for powering unit on to time out or for immediate cut-off (700 ft line-of-sight range). (for SPLasher only)
SPL-SBF Single Button Fob – Single button for powering unit on to time out (700 ft line-of-sight range). (for SPLasher only)
SPL-RFA RF Antenna – 2.4ghz CE, FCC approved RF-DANT with built in RF-DP (1200 ft line-of-sight range). (for SPLasher only)
SPL-RPB Radio and Push Button Kit. Wireless Pedestrian Communication System (CrossWalk)
SWK Switch, key operated.