Speed Tables

Speed tables are flat-topped speed tables with room for the entire wheelbase of a passenger car to rest on top. The flat top design allows cars to maintain slightly higher speeds than they would on speed tables, slowing vehicles to estimated speeds of 20-25 mph. This makes speed tables the ideal solution for roads with typical residential speed limits. Speed tables are 3 inches high. Most often used in lengths of 14 or 21 feet, the tables can be customized to any length and to the width of your roads in increments of 18”.

Flat-topped:

The elevated platform design of the speed tables ensures that speeding cars slow down while safe drivers can continue driving at typical residential speed limits.

Puzzle Piece Design:

Patented interlocking construction connects units like puzzle pieces, keeping them firmly in place.

Completely Customizable:

Modular units allow you to customize your solution length, width, tape color, and choose striping or arrows. The opportunities are limitless.

Environmentally Friendly:

Made of 100% recycled rubber, Speed tables are an eco-conscious way to protect your streets. Grants are often available to municipalities who are buying recycled products

Cost Effective:

Rubber speed tables are long-lasting and removable for years of continuous use. Other solutions often require costly replacements while the Speed table units can simply be removed and reinstalled as necessary.

Highly Visible:

With a choice of yellow or white highway tape embedded into each unit, the speed tables are highly visible, even at night or in poor lighting conditions.

Driver Acceptance:

Prefabricated units offer consistency at all locations, an important factor for motorist acceptance and ease of use. Unlike concrete and asphalt, rubber units maintain their shape over time and do not contract with heat or vehicle pressure.

Simple Installation:

The tables are quick and easy to install by connecting the units and securing them to the road with anchors and bolts. Our units are smaller than the industry standard for easier installation. No road closures or skilled laborers are necessary.

Long lasting:

The Speed cushions are maintenance free and built to resist temperature fluctuations, inclement weather conditions, and ongoing vehicle traffic.

Removable:

The speed tables can be removed for road resurfacing, snow plows, or to test the products at numerous locations. Unlike asphalt and concrete which must be destroyed during removal, the rubber tables can simply be removed and reinstalled.

Two year warranty:

Two year warranty on speed table components installed as per manufacturer’s instructions.

Dimensions of the Speed Humps/Tables:(width and length of speed hump are adjustable)

• Width: from 7’ up, by 3.5’ increments
• Length: according to a street width, from 6’ by 1.5’ increments
• Height: 3” or 4”

Standard dimensions of the Speed Humps/Tables:

• Width: 7’, 14’, 21’
• Length: according to a street width
• Height: 3” or 4”
• Entrance and exit gradient: 1:15
• Side gradient: 1:3
• Material: 100% recycled synthetic and natural rubber composite

Dimensions of the modules:

• Width: 18” (+/- 1/16”)
• Length: 42” (+/- 1/8”)
• Thickness: 3” (+/- 1/8”)

Physical properties:

• Tensile strength: minimum 500 psi
• Shore hardness: minimum 70A
• Specific gravity: 1.1
• Marking: rubber modules are available in black or black with yellow or white reflective tape.