Speed humps should ideally be installed in a series to create ongoing traffic calming. They are best placed mid-intersection on roads with low-speed limits. Rubber speed humps are available in heights of 3 or 4 inches. Often used in lengths of 7 and 14 feet, the humps can be customized to any length and to the width of your roads in increments of 18″.
The sloped design of speed humps compels cars to slow down for effective traffic calming.
Puzzle Piece Design:
Patented interlocking construction connects units like puzzle pieces, keeping them firmly in place.
Modular units allow you to customize your solution length, width, tape color, and choose striping or arrows. The opportunities are limitless.
Made of 100% recycled rubber, speed humps are an eco-conscious way to protect your streets. Grants are often available to municipalities who are buying recycled products.
Rubber speed humps are long-lasting and removable for years of continuous use. Other solutions often require costly replacements while the hump units can simply be removed and reinstalled as necessary.
With a choice of yellow or white highway tape embedded into each unit, the humps are highly visible, even at night or in poor lighting conditions
Prefabricated units offer consistency at all locations, an important factor for motorist acceptance and ease of use. Unlike concrete and asphalt, rubber units maintain their shape over time and do not contract with heat or vehicle pressure.
Speed humps are quick and easy to install by connecting the units and securing them to the road with anchors and bolts. Our units are smaller than the industry standard for easier installation. No road closures or skilled laborers are necessary.
The speed humps can be removed for road resurfacing, snow plows, or to test the products at numerous locations. Unlike asphalt and concrete which must be destroyed during removal, the rubber humps can simply be removed and reinstalled.
The Speed tables are maintenance free and built to resist temperature fluctuations, inclement weather conditions, and ongoing vehicle traffic.
Two year warranty:
Two year warranty on speed table components installed as per manufacturer’s instructions.
Dimensions of the modules:
- Width:18” (+/- 1/16”)
- Length: 42” (+/- 1/8”)
- Thickness: 3” (+/- 1/8”)
Dimensions of the Speed Humps/Tables: (width and length of speed hump are adjustable):
- Width: from 7’ up, by 3.5’ increments
- Length: according to a street width, from 6’ by 1.5’ increments
- Height: 3” or 4”
Standard dimensions of the Speed Humps/Tables:
- Width: 7’, 14’, 21’
- Length: according to a street width
- Height: 3” or 4”
- Entrance and exit gradient: 1:15
- Side gradient: 1:3
- Material: Compression molded 100% recycled synthetic and natural rubber composite
- Tensile strength: minimum 500 psi
- Shore hardness: minimum 70A
- Specific gravity: 1.1
- Marking: rubber modules are available in black or black with yellow or white reflective tape
- Material: 100% recycled synthetic and natural rubber composit