Crosswalk ECO Beacon

ECO SOLAR FLASHER BEACONS

Our ECO Crosswalk Beacons are designed to warn drivers of pedestrian crossings and to use caution when approaching the areas where pedestrians are present. whether in congested cities, or on rural and remote roadways, ECO Beacons perform 24-7 to increase pedestrian and driver safety. Our ECO Beacons come with auto dimming and multi-stage battery charger features built into our smart controller. With our unique compact battery and controller box, installation and set-up is a snap.

img-ECO132-D12-on-Pole-318x1024-93x300
img-sun

The Solar School Zone Beacon only utilizes the most up to date solar and electronics to maintain power levels thru rain, shine, sleet, or snow

img-led

LED technology increases life expectancy of the solar beacon and also burns less energy than conventional bulbs

img-mutcd

Meets MUTCD (Manual on Uniform Traffic Control Devices)

img-nchrp

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)

img-ite

Meets ITE Standards (Institute of Transportation Engineers)

Signal Head Housing

  • Size: 12″
  • Color: Yellow or Black
  • Visor: 360 degree Cap
  • Number of Beacons: 2
  • Material: Plastic injected polystyrene

LED Signal

  • Color: Amber
  • Seal: Weather Resistant
  • LED Bulbs: 2

Options

  • Rapid Flash Beacon: to enhance sign visibility
  • Round Aluminum pole Kit 11′-20′
  • Signage to fit your needs
  • Mounting Hardware to mount to existing Pole

Control Cabinet/Battery

  • Construction: .080 aluminum
  • Seal: Weather resistant
  • Access: Hinged on side
  • Lockable: Twist lock on

CrossTalk

All-in-one Solar Controller, Flasher, and Auto-Dimmer:

  • Optional Wireless Control
  • Small compact design
  • Adjustable Duty Cycle
  • Adjustable Set/Min/Hr Timer

Push Button

  • Accesible push button for pedestrians to activate the flashers when crossing the street
ADD10W Additional 10 watt solar panel.
ADD20W Additional 20 watt solar panel
DED-LED Deduct 12″ LED and housing
ECO-R ECO Solar Beacon Radar for Vehicles. Speed range: 5-99 mph. Also can be set for KPH
ECO-RP ECO Solar Beacon Radar for Pedestrians. Speed range: .5-38 mph.
ECO-RTM ECO Solar Beacon Radar for Towmotor. Speed range: .2-16 mph.
ECO-SS ECO Solar Beacon Speed Selector switch designed to set threshold to trigger radar. Set in 5 minute increments.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CTR-MB Mounting hardware per cabinet (if K&K CTR pole not purchased) to include: pole plate with set screw; 1 1/2″ nipple; tristud elbow with set screw; rubber washer and box bracket.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include: pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CrossTalk Wireless Beacon Control System
CTS-BPMS Bollard Pedestrian Motion Sensor – (for CrossTalk or SPLasher)
CTS-B Bollard – Height: 42″ (for CrossTalk or SPLasher)
CTS-HWS High Water Sensor – 12V epoxy-coated sensor; housed in high impact PVC construction; will detect any conductive non-flammable liquid. (for CrossTalk or SPLasher)
CTS-MS Moisture Sensor – Dual 12V epoxy-coated sensors; no mechanical parts; triggered by a moisture bridge across the sensor contacts. (for CrossTalk or SPLasher)
SPL-FSC Fire Station Control – Includes splasher and antenna; 12V power supply; momentary push-button switch; LED light when powered on. (for SPLasher only)
SPL-DBF Double Button Fob – Double button for powering unit on to time out or for immediate cut-off (700 ft line-of-sight range). (for SPLasher only)
SPL-SBF Single Button Fob – Single button for powering unit on to time out (700 ft line-of-sight range). (for SPLasher only)
SPL-RFA RF Antenna – 2.4ghz CE, FCC approved RF-DANT with built in RF-DP (1200 ft line-of-sight range). (for SPLasher only)
SPL-RPB Radio and Push Button Kit. Wireless Pedestrian Communication System (CrossWalk)
SWK Switch, key operated.